Most Likely Causes (Ranked)
CV joints connect the transmission to the wheels on FWD and AWD vehicles. The inner joint handles up/down suspension travel while the outer joint handles steering angles. When the protective boot tears, grease escapes and dirt enters, wearing the joint. The clicking is most pronounced during tight turns at low speed.
The steering column uses universal joints (U-joints) where the column passes through the firewall. A dry or worn U-joint clicks or clunks when turning, especially when first starting to turn from center.
Tie rod ends connect the steering rack to the steering knuckles. Worn ball joints in the tie rod create play that produces clicking when turning and can affect alignment.
When the PS pump draws air (low fluid, leak, or foaming fluid), it cavitates — creating a clicking or groaning sound during turns. Often accompanied by stiff steering and fluid that looks foamy or bubbly.
The clock spring is a flat cable coil inside the steering column that maintains electrical connection to the airbag, horn, and controls as the wheel turns. A failing clock spring clicks as damaged sections of the cable pass through. May also cause airbag warning light.
How to Fix It
Diagnose the Exact Source
Free – $100Estimated time: 15-30 minutes
- 1Before spending money, narrow down exactly where the clicking when turning is coming from. With the hood open and engine running (keep hands, hair, and clothing clear of moving parts), use a mechanic's stethoscope ($12-20 at any auto parts store) to touch different components and listen. A long screwdriver pressed against a component with the handle to your ear works in a pinch. For undercarriage sounds, safely jack the car, support on jack stands, and have someone start the engine while you listen from below.
Check and Top Off All Fluids
$0 – $30Estimated time: 10 minutes
- 1Low fluid is the simplest and cheapest cause of automotive noise. Check engine oil (dipstick should be between the marks), power steering fluid (reservoir under the hood), coolant (overflow tank), and transmission fluid (follow owner's manual procedure — some check with engine running, some off). Top off anything that's low with the correct specification. If you're losing fluid, find and fix the leak.
Replace Worn Components
$50 – $800+Estimated time: 30 min – 4 hours
- 1Once you've identified the source, replace the worn part. Many automotive repairs are DIY-friendly with basic tools. Common replacements: serpentine belt (Gates K060923 or Dayco 6PK2345) ($25-50 part, 20 min), brake pads ($30-70 per axle, 1 hour), motor mounts ($50-150 part, 1-3 hours). For complex jobs like timing chains, bearings, or internal engine work, a professional mechanic is recommended. Get 2-3 quotes — labor rates vary significantly.
Professional Diagnosis and Repair
$80 – $150 diagnostic + repair costEstimated time: Varies
- 1If you can't identify the source or the repair is beyond your skill level, a professional diagnostic is money well spent. Most shops charge $80-150 for diagnosis, which is often waived if you have the repair done there. Dealerships charge more but know your specific model best. Independent shops are usually 30-50% cheaper for the same work.
When to Call a Professional
If the clicking when turning is accompanied by a dashboard warning light (check engine, oil pressure, temperature, or brake), pull over safely and address it before continuing to drive.
Grinding brakes, engine knocking with low oil pressure, or clicking that prevents starting are safety issues — don't ignore them hoping they'll go away.
If the clicking when turning changes suddenly (gets much louder or changes character), stop driving and investigate. Sudden changes often mean a component has failed completely.
How to Prevent It
Follow your vehicle's maintenance schedule — oil changes, fluid checks, and belt/filter replacements at the recommended intervals prevent most noise-causing wear.
Don't ignore new sounds. A $50 fix today prevents a $500 repair next month. Address unusual sounds within a week of first noticing them.
Keep a maintenance log. Note when services are performed and any new sounds that develop. This helps mechanics diagnose issues faster.
Use the correct fuel grade, oil specification, and coolant type specified in your owner's manual. Wrong fluids accelerate wear.
Frequently Asked Questions
The most common cause of a clicking when turning noise from a car steering is worn internal components that have developed excessive clearance or lost lubrication. Other causes include loose mounting hardware, debris interference, and normal operational sounds that may be new to you. Our guide above ranks the 5 most likely causes from most to least common, with specific diagnostic steps to identify which one matches your situation.
It depends on the specific cause. Most causes of a clicking when turning car steering are not immediately dangerous, but ignoring the sound often leads to more expensive repairs down the road. Some causes can indicate developing safety issues. Check our warning signs section above for when to act urgently versus when it's safe to schedule service.
Costs range widely depending on the cause. Simple fixes like tightening loose hardware, cleaning filters, or replacing a belt can be $0-30 as DIY projects. Mid-range repairs like replacing a motor, pump, or bearing typically run $100-500 including parts and labor. Major repairs or replacements can be $500-3,000+. Our fix guide above includes specific cost ranges for each repair option, and our cause descriptions include part costs where applicable.
Many causes of a clicking when turning car steering are DIY-friendly. Cleaning, tightening, lubricating, and replacing basic wear parts (filters, belts, rollers) require only basic tools. More complex repairs involving gas lines, refrigerant, high-voltage electrical, or major disassembly are best left to professionals. Our fix guide above rates each repair by difficulty and provides step-by-step guidance for DIY-appropriate fixes.